Waarnaar zoekt u?

Zoekbegrip invoeren

Het spijt ons zeer!

Geen zoekresultaten gevonden.

Aanmelding

U bent een nieuwe klant?

Registreer u en profiteer van vele voordelen:

Controle van de beschikbaarheid van het product
Snelle nabestelling & bestelhistorie
Persoonlijke productaanbevelingen
Betaling op rekening

Help & Contact

Neem contact op met HANSA-FLEX

Heeft u vragen over de online-shop of over onze producten?
U kunt onze klantenservice bereiken via:

ma - vr 8:00-17:00 h
za 8:00-12:00 h

Of maak gebruik van de FAQ

Hier vindt u antwoorden op de meest
gestelde vragen.

Helping people help themselves
Naar de FAQ

KTF 325

PTFE-Hose, smooth DN25, 3 braid, ST
Bend radius min.
240 mm
Burst pressure
1,100 bar
Inside Ø
24.2 mm
PDF downloaden

Selecteer a.u.b. een uitvoering

Artikeltabel weergeven
Registreer u nu om onze online shop op te kunnen roepen.

Register now and access our complete product range and many exclusive services.

Productdetails over

KTF 325

Bend radius min.
240 mm
Burst pressure
1,100 bar
Inside Ø
24.2 mm
Outside Ø
31.7 mm
Test pressure
412.5 bar
Weight per m
1.205 kg
Working pressure 20 °C (stat.)
275 bar
Alle eigenschappen

Eigenschappen

Application
  • high-pressure applications with different media, 2-component glue and aggressive media 
Application
  • mainly for the adhesive industry, surface treatment, heater hose systems. 
Approval
  • The base material has an FDA-approval, EG 1935/2004 and EU 10/2011. 
Braiding
  • two-braided of steel wire, bronzed, one layer of steel wire galvanised 
Design
  • smooth inliner in white PTFE 
  • thick-walled 
Features
  • smooth inner liner 
Hose material
  • PTFE (Polytetrafluoroethylene) 
Temp.
  • applies only to the hose 
Temp. max.
  • 200 °C
Temp. min.
  • -70 °C
Alle eigenschappen

Productbeschrijving

Aanwijzingen
The pressure values listed apply to hoses only.
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Bestelaanwijzing
Other designs available on request

Productvarianten

8 Resultaten
Maattekening weergeven
Aanduiding
Bend radius min. (mm)
Burst pressure (bar)
Inside Ø (mm)
Outside Ø (mm)
Prijs / Meter

Column selection

Bend radius min. (mm)
Burst pressure (bar)
Inside Ø (mm)
Outside Ø (mm)
Test pressure (bar)
Weight per m (kg)
Working pressure 20 °C (stat.) (bar)